Daikin WMC Specifications Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
48 Catalog 602-2
Options and Accessories
Vessels
Marine water boxes
Provides tube access for inspection, cleaning, and removal without dismantling water piping.
Flanges (Victaulic connections are standard)
ANSI raised face flanges on either the evaporator and/or condenser. Mating flanges are by others.
Water side vessel construction of 300 psi (150 psi is standard)
For high pressure water systems, typically high-rise building construction.
Single insulation, 3/4 inch, on evaporator (including heads) and suction piping
Insulation, either optional factory-installed or field-installed is generally required on all installations.
Double insulation, 1-½ inch, on evaporator (including heads) and suction piping
For high humidity locations and ice making applications.
Special vessel codes
Including Chinese and Canadian Registration (CRN).
Controls
BAS interface module.
Factory-installed on the unit controller for the applicable protocol being used. (Can also be retrofit)
BACnet MS/TP
L
ONWORKS (FTT-10A)
BACnet IP
Modbus RTU
BACnet Ethernet
Unit
Export packaging
Can be either slat or full crate for additional protection during shipment. Units normally shipped in containers.
Pumpout Unit, with or without storage vessel
Available in a variety of sizes. Details are in Catalog WSCWDC.
Refrigerant monitor
For remote mounting including accessories such as 4-20ma signal, strobe light, audible horn, air pick-up filter.
Extended warranties
Extended 1, 2, 3, or 4 year warranties for parts only or for parts and labor are available for the entire unit, entire unit
plus refrigerant, or compressor/motor only.
Witness performance test
The standard full load run test is performed in the presence of the customer under the supervision of a factory engineer,
includes compilation of the test data. Travel and local expenses are not included.
Certified performance test
The standard run test is performed under the supervision of a factory engineer; data is compiled and certified.
Approvals/listings
AHRI Approval and ETL/CETL listing is standard. MEA is optional.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Comments to this Manuals

No comments