Daikin Quaternity H-Series Specifications download pdf (Page 74)

EDUS04-906_b Optional Accessories

Room Air Conditioners H-Series 73

Installation

This product is available in two types. The KRP413A1S · KRP413AA1S is for installation in a case independent of the indoor unit, and

the KRP413A1 is for installation within the indoor unit.

1. KRP413A1S · KRP413AA1S

1 Installation diagram

Indoor unit PCB

Adaptor case

wiring

Local wiring or

power cord, etc.

S21

2 Components

 Adaptor case assy  Wiring (approx. 0.8 m)

(Adaptor (PCB) is attached in the adaptor case.)

 Accessories

• Binding band (4 pcs.)

• Securing tape for attaching to the indoor unit (2 sets)

• Screws for attaching the adaptor case (4 pcs.)

• Screws for attaching to the wall (3 pcs.)

 Installation manual

2. KRP413A1

For this type, install the adaptor PCB within the indoor unit. The method of

installation and connection vary depending on the model of the air

conditioner. See your air conditioner installation manual for details.

1 Components

 Adaptor PCB  Wiring (approx. 0.25 m)

 Installation manual

Attaching Adaptor Case Assy (for KRP413A1S · KRP413AA1S)

1 Using the screws (to mount on a wall, etc.)

 Use the 3 supplied screws to attach the case assy .

Indoor unit

Adaptor case

Install the adaptor case assy as close to the indoor unit as possible.

 Removing case front

Adaptor PCB

Case front

Screw

Screw cover

Remove the screw cover, one of the screws

and then the case front.

 Attach the case back to the surface by

tightening the screws through the screw

holes (one round hole, two long holes).

 After connecting the cables (refer to the following sections), replace the

case front. Be careful not to damage the wiring in the case.

Wiring

Press in so that the prong catches

the case back.

Screw

Screw cover

2 Using securing tape (to attach on the indoor unit)

 Attach the adaptor case with the supplied securing tape.

 Remove the case front (as for mounting on a wall).

 After connecting the cables (see the following sections), replace the

case front. It can be screwed to the case back from the rear with the

four supplied screws.

Be careful not to damage the wiring in the case.

 Attach the hook side (loop side) of the included securing tape to the rear

surface of the HA case, then attach the loop side (hook side) to the top of

the air conditioner unit spaced at the same intervals.

Securing tape

Hook side (loop side)

Securing tape

Loop side (hook side)

Indoor unit

To prevent the adaptor case assy from falling, do not use the securing

tape for attaching it to a wall or other surface.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments

Daikin Quaternity H-Series Specifications Page 74

Comments to this Manuals

Related products and manuals for Heat pumps Daikin Quaternity H-Series