Daikin Quaternity H-Series Specifications download pdf (Page 30)

EDUS04-906_b Installation Manual

Room Air Conditioners H-Series 29

9

6.

Connecting to the HA system.

1) Remove the front grille. (3 screws)

2) Remove the decelerator assembly parts.

(1 screw)

2-1) Remove the decelerator assembly

part screws. (See Fig. 1)

2-2) Remove the decelerator assembly

part connector. Remove by pressing

on the tabs on the bottom of the

connector.

(See the tab position diagram 1)

3) Remove the electric parts box.

(1 screw, 2 tabs)

3-1) Remove the electric parts box fixing

screw.

3-2) Pull the electric parts box toward

you and discharge the tab 2.

4) Remove the electric parts box cover.

(3 tabs) (Refer to Fig. 2)

4-1) Discharge the tab 3.

4-2) Pull up the electric parts box cover

slowly, discharge the tab 4, slide up,

and discharge the tab

5.

5) Insert the connection cord into the HA

connector “S21”.

6) Lay the connection cord as shown in

“Fig. 3”.

7) Replace the electric parts box cover and

electric parts box as they were.

8) Attach the decelerator assembly part

along with the guide rail. (Refer to Fig. 2)

9) Install the front grille.

Fig. 1

Decelerator assembly

part fixing screw

Anti-drip cover

Electric parts box

fixing screw

Anti-drip cover

fixing screw

Position of tabs on the decelerator

assembly part connector

Location of the tabs

on the electric parts box

Ta b

Ta b 2

Ta b 1

Buzzer

Ta b 3

Electric parts box cover

Guide rail

Ta b 4

Ta b 5

Fig. 2

Inside the electric parts box

Fig. 3

Electric parts box cover

HA connector

“S21”

To connection cord

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 79 80

Comments to this Manuals

No comments