Daikin BRC7E61W Service Manual download pdf (Page 34)

SiE25-110 Wired Remote Controller

Remote Controller 25

1

ON/OFF BUTTON

Press the button and the system will start.

Press the button again and the system will

stop.

2

OPERATION LAMP (RED)

The lamp lights up during operation.

3

DISPLAY “ ” (UNDER CENTRAL-

IZED CONTROL)

When this display shows, the system is

UNDER

CENTRALIZED CONTROL.

4

DISPLAY “ ” “ ” “ ” “ ”

(VENTILATION/AIR CLEANING)

This display shows that the total heat

exchange and the air cleaning unit are in

operation (These are optional

accessories).

5

DISPLAY “ ” “ ” “ ” “ ” “ ”

(OPERATION MODE)

This display shows the current OPERATION

MODE. For cooling only type, “ ” (Auto)

and “ ” (Heating) are not installed.

6

DISPLAY “

TEST

” (INSPECTION/TEST

OPERATION)

When the INSPECTION/TEST OPERATION

BUTTON is pressed, the display shows the

system mode is in.

7

DISPLAY “ ” (PROGRAMMED TIME)

This display shows the PROGRAMMED TIME

of the system start or stop.

8

DISPLAY “ ” (SET TEMPERATURE)

This display shows the set temperature.

9

DISPLAY “ ” (FAN SPEED)

This display shows the set fan speed.

10

DISPLAY “ ” (AIR FLOW FLAP)

11

DISPLAY “ ” (TIME TO CLEAN AIR FIL-

TER)

12

DISPLAY “ ” (DEFROST)

13

NON-FUNCTIONING DISPLAY

If that particular function is not available, press-

ing the button may display the words “NOT

AVAILABLE” for a few seconds.

When running multiple units simultaneously

The “NOT AVAILABLE” message will only be

appear if none of the indoor units is equipped

with the function. If even one unit is equipped

with the function, the display will not appear.

hr

hr

C

14

TIMER MODE START/STOP BUTTON

15

TIMER ON/OFF BUTTON

16

INSPECTION/TEST OPERATION BUTTON

This button is used only by qualified service

persons for maintenance purposes.

17

PROGRAMMING TIME BUTTON

Use this button for programming “START and/

or STOP” time.

18

TEMPERATURE SETTING BUTTON

Use this button for SETTING TEMPERATURE.

19

FILTER SIGN RESET BUTTON

20

FAN SPEED CONTROL BUTTON

Press this button to select the fan speed,

HIGH or LOW, of your choice.

21

OPERATION MODE SELECTOR BUTTON

Press this button to select OPERATION MODE.

22

AIR FLOW DIRECTION ADJUST BUTTON

NOTE

•

For the sake of explanation, all indications are

shown on the display in Figure 1 contrary to

actual running situations.

3PA59583-16Z-2

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 254 255

Comments to this Manuals

No comments