Daikin BRC1E72 Installation Manual download pdf (Page 17)

English 15

Notes) Field settings are normally applied to the entire remote control group, however if individual 1.

indoor units in the remote control group require speciﬁ c settings or for conﬁ rmation that

settings have been established, utilize the mode number in parenthesis.

Any features not supported by the installed indoor unit will not be displayed.2.

When mode 10-2-01 is selected, only the return air temperature value is reported to the 3.

multizone controller.

The actual default deadband value will depend upon the indoor unit model.4.

Test Operation7.

Also see installation manuals attached to the indoor unit and the outdoor

unit.

Check that wiring work of the indoor unit and the outdoor unit is completed. ●

Ensure that covers have been replaced on electrical component boxes for both indoor and outdoor ●

units prior to restoring power.

After refrigerant piping, drain piping and electric wiring are completed, clean inside of the indoor unit ●

and decorative panel.

Perform the test operation according to following procedure. ●

To protect the compressor, apply power to the outdoor unit at least 6 hours prior to test operation. ●

Set the remote controller display mode to standard or detailed display mode. Refer to Operation ●

Manual for the setting method.

● The backlight will illuminate for 30 seconds by pressing any button.

The initial push of the button will only illuminate the backlight. While the backlight is illumi- ●

nated, the buttons assigned functionality will be available.

Notes for backlight

7-1 Set the operation mode to cooling by

using the remote controller.

Press and hold 7-2 Cancel button for

4 seconds or longer. Service settings

menu is displayed.

Select 7-3 Test Operation in the service

settings menu, and press Menu/OK

button. Basic screen returns and Test

Operation is displayed at the button.

17-

27-

Cool

Return Clean the filter

Set to

68F

Press and hold Cancel

button for 4 seconds or

longer during backlight lit.

37-

Setting

1/3

Service Settings

Test Operation

Maintenance Contact

Field Settings

Energy Saving Options

Prohibit Function

Min Setpoints Differential

Press Menu/OK button.

01_EN_3P243521-3D.indd 1501_EN_3P243521-3D.indd 15 9/13/2012 7:22:20 PM9/13/2012 7:22:20 PM

1 ... 16 17 18 ... 72

Comments to this Manuals

No comments

Daikin BRC1E72 Installation Manual Page 17

Comments to this Manuals

Related products and manuals for Remote controls Daikin BRC1E72