SiEBE12-625 Instruction
List of Functions 127
To operate the remote control
• To use the remote control, aim the transmitter at the
indoor unit. If there is anything to block signals between
the unit and the remote control, such as a curtain, the
unit will not operate.
• Do not drop the remote control. Do not get it wet.
• The maximum distance for communication is about 7m.
To fix the remote control holder on the wall
1. Choose a place from where the signals reach the
unit.
2. Fix the holder to a wall, a pillar, or similar location
with the screws procured locally.
3. Place the remote control in the remote control
holder.
ATTENTION
Receiver
Remote control
holder
Set.
To remove, pull it upwards.
About remote control
• Never expose the remote control to direct sunlight.
• Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.
• Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as inverter-type lamps) is in
the room. Consult the shop if that is the case.
• If the remote control signals happen to operate another appliance, move that appliance to somewhere else, or consult
the shop.
Comments to this Manuals