Daikin ATX20JV1B Specifications Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
Operation Manual SiBE041010
44 Operation Manual
11
To change the airflow rate setting
5. Press “FAN setting button”.
Indoor unit quiet operation
When the airflow is set to “ ”, the noise from the indoor unit will become quieter.
Use this when making the noise quieter.
The unit might lose capacity when the airflow rate is set to a weak level.
NOTE
DRY mode AUTO or COOL or HEAT or FAN mode
The airflow rate setting is not variable.
Note on HEAT operation
During defrosting operation, hot air does not flow out of indoor unit.
Note on COOL operation
Note on DRY operation
Note on AUTO operation
If you do not like AUTO operation, manually change the set temperature.
Note on airflow rate setting
At smaller airflow rates, the cooling (heating) effect is also smaller.
Five levels of airflow rate setting from “ ” to “ ”
plus “ ” “ ” are available.
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating
capacity becomes smaller in lower outdoor temperatures. If the heating effect is insufficient, it is rec-
ommended to use another heating appliance in combination with the air conditioner.
The heat pump system heats the room by circulating hot air around all parts of the room. After the
start of heating operation, it takes some time before the room gets warmer.
In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that case,
the system switches into defrosting operation to take away the frost.
This air conditioner cools the room by blowing the hot air in the room outside, so if the
outside temperature is high, the performance of the air conditioner drops.
The computer chip works to rid the room of humidity while maintaining the temperature as
much as possible. It automatically controls temperature and airflow rate, so manual adjust-
ment of these functions is unavailable.
In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on
the room temperature at the start of the operation.
The system automatically reselects setting at a regular interval to bring the room temperature to user-
setting level.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 155 156

Comments to this Manuals

No comments