Figure 2: Operator Interface Trend History Screen
The controller memory (no batteries required) also retains
the fault history for troubleshooting and monitoring unit
performance. A time/date stamp is associated with each fault.
The fault history can be downloaded through the USB port.
RapidRestore
®
Mission critical facilities such as data centers and hospitals
are demanding stringent capabilities for chillers to restart and
reach full load operation quickly in the event of a power loss.
With the capability of RapidRestore
®
, Magnitude
®
model WMC
chillers are engineered to meet those needs. See Table 1
below for specications.
Table 1: WMC RapidRestore
®
Times- After Power
Restoration
Compressor Start Fast Loading to 80% Load
43 sec 120 sec*
* Estimated load time. Times may vary depending on operating conditions.
Open Choices
™
BAS Flexibility
The exclusive Open Choices
™
feature provides seamless
integration and comprehensive monitoring, control, and
two-way data exchange using industry standard protocols
LonTalk
®
, BACnet
®
or Modbus
®
. Open Choices
™
offers simple
and inexpensive exibility to use the Building Automation
System (BAS) of your choice without an expensive gateway
panel. Open Choices
™
benets include:
• Easy to integrate into your BAS of choice
• Factory- or eld-installed communications module
• Integrated control logic for factory options
• Easy-to-use local user interface
• Comprehensive data exchange
Certications and Standards
As with many other Daikin Applied chiller products, the
Magnitude
®
model WMC meets all necessary certications
and standards.
AHRI Certication
Part load performance can be presented in terms of Integrated
Part Load Value (IPLV), which is dened by AHRI Standard
550/590. Based on AHRI Standard 550/590, and as shown
in Figure 3, a typical chiller can operate up to 99% of the time
at off-peak conditions and usually spends most of this time at
less than 60% of design capacity.
Figure 3: IPLV Dened by AHRI Standard 550/590
WMC chillers are rated and certied to AHRI Standard
550/590. The ability of the WMC chillers to achieve very high
part load efciencies, as evidenced by their world-class IPLV
ratings, is due primarily to the use of a variable frequency
drive and the low friction of the magnetic bearing system. For
more information on variable frequency drives, see Integrated
Variable Frequency Drive on page 5.
RapidRestore
®
– Quickly restores cooling capacity
when power is restored after a power failure
• Compressor Start – Amount of time required for
the chiller to restart
• Fast Loading – Amount of time required for the
chiller to reach a certain load condition
Percent Ton-Hour Weighting
CAT 602-4 • MAGNITUDE
®
MODEL WMC CHILLERS 6 www.DaikinApplied.com
feaTures and benefITs
Comments to this Manuals