Daikin WMC Specifications download pdf (Page 10)

Unit Options

Export Packaging

A wooden skid that aids in moving the unit and tight tting

plastic covering the entire unit to protect it from dirt and grime

during transit and storage are standard. Open and closed

crating is also offered as an option.

Pumpout Unit, With or Without Storage Vessel

Available in a variety of sizes, single-phase or three-phase,

with and without tanks. Contact your Daikin Applied sales

ofce for details.

Extended Warranties

Extended 1, 2, 3, or 4 year warranties for parts only or for

parts and labor are available for the compressor/motor only,

the entire unit, or the entire unit including refrigerant.

Witness Performance Test

The specied full and/or part load tests, as ordered, are

performed in the presence of the customer under the

supervision of a factory engineer and include compilation of

the test data onto an easy-to-read spreadsheet.

Non-Witness Test

The specied full and/or part load run tests, as ordered, are

performed under the supervision of a factory engineer; data is

compiled, certied and transmitted to the customer.

Refrigerant Charge

Holding charge of Nitrogen or R-134a. Shipping with a full

charge of R-134a is standard.

Knockdown Shipment

Several options for a knockdown shipment to facilitate unit

placement. See Retrot Knockdown on page 15 for details.

Vessel Options

Marine Waterboxes

Provide tube access for inspection, cleaning, and removal

without dismantling water piping.

Flanges (grooved connections are standard)

ANSI raised face anges on either the evaporator or

condenser. Mating anges are by others.

300 psi Water Side Vessel Construction

For high pressure water systems, typically high-rise building

construction (150 psi is standard).

Epoxy and Ceramic Coating

Evaporator and condenser heads and marine waterboxes can

be coated for corrosion protection with either epoxy or ceramic

coatings. Tube sheets may also be ceramic coated.

Single Insulation - Evaporator Shell / Suction Piping

0.75-inch thermal insulation on cold surfaces excluding heads

and waterboxes.

Single Insulation - Evaporator Heads and

Waterboxes

0.75-inch thermal insulation.

Double Insulation - Evaporator Shell / Suction

Piping

1.5-inch thermal insulation on cold surfaces (0.75-inch on

suction piping) excluding heads and waterboxes.

Double Insulation - Evaporator Heads and

Waterboxes

1.5-inch thermal insulation.

Hinged Waterbox Covers and Heads

Hinges for marine waterbox covers or heads (compact

waterboxes) to aid in heat exchanger maintenance.

Tube Size, Wall Thickness and Material

A wide range of tube options are available to accommodate

most ow rates and uids. Standard wall thickness is 0.025-

inch, optional 0.028-inch or 0.035-inch.

Controls Options

BAS Interface Module

Factory-installed on the unit controller for the applicable

protocol being used (Can also be retrot):

• BACnet

MS/TP

• BACnet

Ethernet

• LonWorks

• Modbus

RTU

Electrical Options

Power Panel High Short Circuit Current Rating

65 kA panel rating (Standard is 35 kA).

EMI Filter

Factory-installed option. Radio interference lter.

Ground Fault Protection

Protects equipment from arcing ground fault damage from

line-to-ground fault currents less than those required for

conductor protection.

Input Power Meter

Allows display of input phase amps and volts on the operator

interface screen.

CAT 602-4 • MAGNITUDE

MODEL WMC CHILLERS 10 www.DaikinApplied.com

opTIons and aCCessorIes

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Daikin WMC Specifications Page 10

Comments to this Manuals

Related products and manuals for Small kitchen appliances Daikin WMC