Daikin WMC Instruction Manual download pdf (Page 49)

www.DaikinApplied.com 49 IOM 1210-1 • MAGNITUDE

MODEL WMC CHILLERS

operaTIon

2nd Level Menu Selection Data Screen

VIEW < COMPRESSOR

< UNIT

< EVAPORATOR

< CONDENSER

→

VIEW EVAPORATOR

Suct SH = 000.0°F

Approach = 00.0°F

Other selections, such as VIEW → UNIT, will bring up a

third level of menu screens.

2nd Level Menu Selection 3rd Level Menu Screen

VIEW < COMPRESSOR

< UNIT

< EVAPORATOR

< CONDENSER

→

VIEW < STATUS

UNIT < WATER

< REFRIGERANT

< TOWER

For instances such as this, make selections on the 3rd

level menu screen in order to reach the data screens. A

data screen will be apparent by the lack of the following

symbol: < .

4. The rst data screen that is reached will be at the top

row of the data menu structure. Once a data screen is

reached, the arrow keys will automatically exit out of the

“key-to-screen pathway” mode and will enter the “scroll”

mode. Select different data screens by using the arrow

keys on the controller. See "Menu Structure (Scrolled)"

for more information on navigating using the “scroll”

mode.

Menu Structure (Scrolled)

As an alternate to selecting data screens with the menu

function, it is possible to scroll through the screens with the

four arrow keys. (Use the LEFT/RIGHT keys to move between

columns and the UP/DOWN keys to move between rows.)

For this use, the screens are arranged logically in a matrix as

shown in Table 19 on page 50. In the “scroll” mode, there will

be a blinking cursor located at the top left of the screen.

The controller holds memory during scroll navigation to make

it easier to compare two screens to one another. Take the

example of comparing the following two screens:

VIEW COMP (7)

Hours = 00000 x10

Starts = 00000 .

VIEW COMP#2 (7)

Hours = 00000 x10

Starts = 00000 .

Both of these screens are the seventh row in the “VIEW

COMPRESSOR” section of the Menu Matrix (see Table 19 on

page 50). The left screen is the data for Compressor 1 while

the right screen is the data for Compressor 2.

In order to toggle between these two screens:

1. Use the DOWN arrow key to scroll to the “VIEW COMP

(7)” screen.

VIEW COMP (7)

Hours = 00000 x10

Starts = 00000 .

2. Press the RIGHT arrow key. The controller will display

the “VIEW COMP #2 (1)” screen (the screen at the top

row of the next column).

VIEW COMP#2 (1)

State = Run

% RLA = 095%

Evap LWT = 054.0°F

3. Use the DOWN arrow key to scroll down to the “VIEW

COMP #2 (7)” screen.

VIEW COMP#2 (7)

Hours = 00000 x10

Starts = 00000 .

4. Press the LEFT arrow key. Due to the controller memory,

the controller will display the “VIEW COMP (7)” screen

rather than showing the “VIEW COMP (1)” screen (the

screen at the top of that column).

VIEW COMP (7)

Hours = 00000 x10

Starts = 00000 .

5. At this time, the LEFT and RIGHT arrow keys can be

used to toggle back and forth between the “VIEW COMP

(7)” screen and the “VIEW COMP#2 (7)” screen.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Comments to this Manuals

No comments

Daikin WMC Instruction Manual Page 49

Comments to this Manuals

Related products and manuals for Small kitchen appliances Daikin WMC