R410A Split SeriesINSTALLATION MANUALDAIKIN ROOM AIR CONDITIONEREnglishDeutschFrançaisNederlandsEspañolItalianoΕλληνικÜPortuguesРóссêийTürkçeInstallat
English 8EnglishIndoor Unit Installation1.Installing the mounting plate• The mounting plate should be installed on a wall which can support the weigh
9 EnglishIndoor Unit Installation4.Laying piping, hoses, and wiring • The recommended installation method is back piping. • When performing side pipi
English 10English9) While exercising care so that the inter-unit wiring do not catch indoor unit, press the bottom edge of indoor unit with both hand
11 EnglishIndoor Unit Installation7.Wiring, install as described in the installation manual supplied with the multi outdoor unit.1) Strip wire ends (
English 12EnglishTrial Operation and Testing1.Trial operation and testing1-1 Measure the supply voltage and make sure that it falls in the specified
10_TR_3P255640-1.fm Page 14 Monday, November 30, 2009 4:54 PM
PAPER PATTERN FOR BOTTOM PIPING <Cut line><Cut line>RIGHT BOTTOM<Cut line><Cut line>LEFT BOTTOM10_TR_3P255640-1.fm Page 15 M
(1001) HT3P255640-1M09B143Two-dimensional bar code is a code for manufacturing.00_CV_3P255640-1.fm Page 2 Friday, November 13, 2009 10:51 AM
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,Kita-ku, Osaka, 530-8323 Japan DAIKIN INDUSTRIES, LTD.Low Voltage 2006/95/ECElectromagnetic Compatibi
1 EnglishSafety Precautions• The precautions described herein are classified as WARNING and CAUTION. They both contain important information regardin
English 2EnglishAccessories – , Service Parts• Obtain service parts as necessary.• If a service part is required, obtain and install the part ind
3 EnglishIndoor Unit Installation Drawings INTELLIGENT EYE sensorCAUTION• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to d
English 4EnglishPreparation before Installation1.Removing and installing front panel • Removal method 1) Hook fingers on the indentations on the left
5 EnglishPreparation before Installation7) Wear protection gloves and insert both hands under the front grille as shown in the illustration. 8) Remov
English 6English• Attachment methods of connection cord 1) Remove the metal plate electrical wiring cover. (Refer to the Removal methods of metal pla
7 EnglishRefrigerant Piping Work2.Refrigerant pipingCAUTION• Use the flare nut fixed to the main unit. (To prevent cracking of the flare nut by aged
Comments to this Manuals