Daikin BRC1E52A Service Manual Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 139
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
131
• Control systems
• Standard protocol interfaces • LonWorks Interface
External connection diagram
10A
Alive/wink
Service
Caution
Service switch
F1 F2
N L
T2 T1
L0
100-240V
~
50/60Hz
F1, F2 F1, F2
Make sure the power supply is off
when carrying out the following works:
1. When taking off the front cover
2. When operating the connectors/switches on the PCB
Power
3 — M4 4 — M3.5
Outdoor
unit
maximum of 64 group
Forced OFF input
LONWORKS Network
Earth Leakage breaker
(Install for safety)
Power Supply
100-240VAC~50/60Hz
Power Supply
wiring: 2.0mm
2
Implement the grounding in
accordance with the standards of
the applicable country and region.
Earth wiring 2.0mm
2
3D040974
DMS504B51
No.
Wiring specifications
1
LonWorks Network Communication wiring
Use the dedicated line for the LonWorks Network
DMS504B51
LO
Polarity: No
2
DIII-net wiring
DMS504B51
T1
T2
Polarity: No
Outdoor
unit
F1, F2 F1, F2 F1, F2 F1, F2
Cautions for wiring
5 Do not use multicore cables with three or more cores
6 Use wires of sizes between 0.75mm2 and 1.25mm2
7 Wire length: MAX 1,000m
8 Do not bind the wire for DIII-net
9 Wirings for DIII-net must be isolated from the power lines.
10 Terminal contact size: M3.5
3
Forced OFF input
DMS504B51
T1
T2
0.75mm~1.25mm
2
vinyl cord or cable with sheath (2 wire) up to 150m maximum
Forced OFF
When forced OFF input is kept on, the indoor
units connected to this system are unable to
be operated because they are forced off.
11 Use a no voltage contact
12 Use a contact which can guarantee mimimum
application load DC16V and 10 mA
13 Do not use multicore cables with three or more cores
14 Wirings must be isolated from the power lines
15 Terminal contact Size: 3.5
Definition of LED and switch
LED
ALIVE/WINK CPU normal monitor Green Normal Blinking every 0.4 sec
Red WINK command reception Blinking every 0.2 sec.
SERVICE LON status Yellow Normal Light off
Unconfigurate state Blinking every 0.5 sec
SERVICE SW on Light on
Error Blinking/flashing every 0.84 sec
Switch
SERVICE SW: Neuron ID is sent upon pushing this switch
Page view 131

Comments to this Manuals

No comments