Daikin VRVIII Specifications download pdf (Page 39)

CONTROL SYSTEMS

Building Management System

System Configuration

No. Item Model No. Function

•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-

conditioning systems through LONWORKS

communication.

DMS504B514

•Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET communication ports. Not usable

independently.

DAM411B513-1

No. Item Model No. Function

*2 Interface for use in LONWORKS

•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-

conditioning systems through BACnet

communication.

DMS502B51

•Additional 64 groups (10 outdoor units) is possible.

Max. 7 iTM plus adaptors can be connected to intelligent Touch Manager.

DCM601A52

*1 Interface for use in BACnet

Optional DIII board

KJB411A

•Expansion kit, installed on DMS502B51, to provide 16 more wattmeter pulse input points. Not usable

independently.

DAM412B51Optional Di board

•8 pairs based on a pair of On/Off input and abnormality input.DEC101A51Di unit2-5

3-2

1-2

Electrical box with earth terminal (4 blocks)

DCS601A521-1 •Additional 64 groups (10 outdoor units) is possible.

•Wall embedded switch box.

DCS601C51 •Air-Conditioning management system that can be controlled by a compact all-in-one unit.

intelligent Touch

Controller

DIII-NET plus adaptor

intelligent Touch Controller

Hardware

HardwareBasic

DCM601A51 •Air-conditioning management system that can be controlled by touch screen.

intelligent Touch Manager

DCM601A53 •Max. 5 intelligent Touch Managers can be integrated.iTM integrator

HardwareBasic

Option

iTM plus adaptor

•Building energy consumption is visualised.

Wasted air-conditioning energy can be found out.

DCM008A51iTM energy navigator

•Power consumption of indoor units are calculated based on operation status of the indoor unit and

outdoor unit power consumption measured by kWh metre.

DCM002A51

iTM power proportional

distribution

2-2

2-1

2-4

2-3

Hardware

Software

Option

•4 pairs based on a pair of On/Off input and abnormality input.DEC102A51Dio unit2-6

•Interface between the central monitoring board and central control units.DCS302A525

Unification adaptor for

computerised control

Notes: *1.

BACnet

is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).

*2. LONWORKS

is a trademark of Echelon Corporation registered in the United States and other countries.

*3. Installation box for adaptor must be obtained locally.

Communication

line

Contact/analogue

signal

intelligent Touch

Manager

•

Up to 64 groups of indoor units(128 units) can be connected, and ON/OFF, temperature setting and

monitoring can be accomplished individually or simultaneously. Connectable up to 2 controllers in one

system.

Note 2

DCS302CA61

Central remote controller2

•Up to 16 groups of indoor units (128 units) can be easily controlled using the large LCD panel. ON/OFF,

temperature settings and scheduling can be controlled individually for indoor units.

Note 3

DCS303A51

Residential central remote controller1

•Up to 16 groups of indoor units(128 units) can be turned, ON/OFF individually or simultaneously, and

operation and malfunction can be displayed. Can be used in combination with up to 8 controllers.

Note 2

DCS301BA61

Unified ON/OFF controller3

KJB212AA

Electrical box with earth terminal (2 blocks)3-1

KEK26-1A

Noise filter (for electromagnetic interface use only)3-2

KJB311AA

Electrical box with earth terminal (3 blocks)2-1

DTA102A52

Interface adaptor for SkyAir series

DTA107A55

DTA103A51

Wiring adaptor for other air-conditioner7

•Up to 1024 units can be centrally controlled in 64 different groups.

•Wiring restrictions (max. length: 1,000 m, total wiring length: 2,000 m, max. number of branches: 16)

apply to each adaptor.

DTA109A51

D -NET

Expander Adaptor

•Fixing plate for DTA109A51KRP4A92

Mounting plate

8-1

•Adaptors required to connect products other than those of the VRV System to the high-speed DIII-NET

communication system adopted for the VRV System.

* To use any of the above optional controllers, an appropriate adaptor must be installed on the product unit to be

controlled.

For UAT

(

)

-K

(

)

,FD-K

For SkyAir, FD

(

)

M-FA, FDY-KA,

FDYB-KA, FVY(P)J-A, FXUQ-MA

Central control adaptor kit

DTA112BA51

For SkyAir FFQ-B, FHQ-BV,

FAQ100BV, FBQ-B

Notes: 1. Installation box for adaptor must be obtained locally.

2. For FXUQ-MAV1, an interface adaptor (DTA102A52) for the SkyAir series is necessary.

3. For residential use only. Cannot be used with other centralised control equipment.

•Programmed time weekly schedule can be controlled by unified control for up to 64 groups of indoor units

(128 units). Can turn units ON/OFF twice per day.

Note 2

DST301BA61

Schedule timer4

1 2 ... 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Daikin VRVIII Specifications Page 39

Comments to this Manuals

Related products and manuals for Heat pumps Daikin VRVIII