CONTROL
Electronic built-in controller: ECFWEB6 & Electronic remote controller: ECFWER6
Operating mode: automatic or at fixed speed›
Setting: to turn the fan coil unit ON /OFF›
Controlling the electric heating›
Cooling / heating selector›
Thermostat to control the room temperature›
Operational LEDs that indicate the current operating mode›
Voltage free contacts, allowing to switch the unit ON/ OFF›
Voltage free contacts for centralized cooling/heating changeover›
Water temperature probe›
Air temperature probe›
Electromechanical built-in controller: ECFWMB6
Fan speed selector›
Manual cooling/heating changeover.›
ON / OFF valves can also be controlled with ECFWMB6.›
Master / Slave interface: EPIMSA6
Available as an additional interface, which is required for units with a current greater than 1.12A.›
Optional for remote control of up to 4 fan coil units›
Up to 3 Master / Slave interfaces can be connected in parallel, enabling control over up to 12 fan›
coil units.
Power interface: EPIA6
Available as an additional interface, which is required for units with a current greater than 1.12A.›
Required for connection of ECFWER6 to FWD12-18.›
Can be used as an alternative for Master /Slave interface.›
12
The fan coil units can be operated by different controllers according to the model.
EPC_08-406.indd 11 26-03-2008 10:26:30
Comments to this Manuals