OH08-1 Remote Controller (Wireless Type)
Control Systems 39
2
3PA63363-24W-11
Press OPERATION MODE SELECTOR
BUTTON
“ ” on the left-hand of the malfunction code
blinks.
Press PROGRAMMING TIMER BUTTON
and change the malfunction code.
Press until the indoor unit beeps twice.
Press OPERATION MODE SELECTOR
BUTTON
“ ” on the right-hand of the malfunction
code blinks.
Press PROGRAMMING TIMER BUTTON
and change the malfunction code.
Press until the indoor unit makes a long
beep.
The malfunction code is fixed when the
indoor unit makes a long beep.
Reset of the display
Press OPERATION MODE SELECTOR
BUTTON to get the display back to the
normal state.
MODE
3
4
DOWN
UP
5
MODE
6
DOWN
UP
7
MODE
II.
IN CASE BESIDES EMERGENCY STOP
1. The unit does not operate at all.
•
Check if the receiver is exposed of
sunlight or strong light. Keep receiver
away from light.
•
Check if there are batteries in the
remote controller. Place the batteries.
•
Check if the indoor unit number and
wireless remote controller number are
equal.
Operate the indoor unit with the remote con-
troller of the same number.
Signal transmitted from a remote controller of
a different number cannot be accepted. (If
the number is not mentioned, it is considered
as “1”)
Comments to this Manuals