Page 29 of 36 / OM 1169-1
Main Menu
Display Mode
Step 1.
Navigate to the conguration screen.
Press ▼▲ buttons to select
Display
on the conguration
screen.
Press Menu/OK button to display the display screen.
Setting
Configuration
Contrast Adjustment
Display
Step 2.
Press ▼▲ buttons to select
Display Mode
on the display
screen.
Press Menu/OK button to display the Display Mode screen.
Setting
Display
Display Mode Standard
Display Item None
Step 3.
Press ▼▲ buttons to select
Standard
or
Detailed
on the
display screen.
Press Menu/OK button to conrm the settings and return to
the basic screen.
Note: Refer to Display Item to change detailed display
selection.
Setting
Display Mode
Display
Standard
Display Item
Step 1.
Navigate to the display screen, Main Menu Conguration
Display.
Press ▼▲ buttons to select
Display Item
on the display
screen.
Press Menu/OK button to display the display item screen.
Setting
Display
Display Mode Standard
Display Item None
Step 2.
Pressing ▼▲ buttons displays the following.
None ◄►*Outside Air Temp
*System ◄► Room Temp
* The SmartSource Inverter WSHP will not display these items
even if they are selected.
Be sure to read the following notes regarding display of room
temperature and outside air temperature.
Setting
Display Item
Display
None
Room Temp
The temperature at the remote controller. The temperature
that is detected may be affected by the location of the remote
controller.
Comments to this Manuals