Daikin FXAQ09MVJU Installation Manual download pdf (Page 10)

• Remove the drain plug, the insulation tube, and the drain hose from the drain pan and replace.

(Refer to Fig. 8)

• Connect the local refrigerant piping ahead of time, matching it to the liquid pipe and gas pipe marks

engraved on the installation panel (accessory) (1).

< Replacing the drain hose and drain plug >

(1) Remove the drain plug and insulation tube.

(2) Remove the drain hose and replace onto the left side.

(3) Replace the drain plug and the insulation tube onto the right side.

(6) Hook the indoor unit onto the installation panel. (Refer to Fig. 9)

• Placing buffering material between the wall and the indoor unit at this time will make work easier.

For bottom-right and back-right piping

• Pass the drain hose and the refrigerant piping to the wall.

(7) Pass power supply wiring and ground wiring threaded through conduit (For connecting the con-

duit to the unit, see “8-1 HOW TO CONNECT WIRINGS”), and remote controller wiring through the

wiring guide in through the back of the indoor unit and to the front.

Drain plug

Insulating tube

Fig. 8

Do not place lubricant (refrigerant oil) when inserting.

This may cause deterioration and water leaks.

Insert using a hexagon wrench (4mm).

Make sure

there are

no gaps.

Refrigerant piping

Be sure to pass all wires through

the wiring guide.

Ta b

(There are 2 places.)

Wiring (locally procured)

Transmission wiring, Remote controller wiring

Wall

Installation panel

(accessory) (1)

Front panel

Front grill

Service lid

Place buffering material

Power supply wiring,

Ground wiring

Conduit

Hook the indoor unit hook onto the installation panel (1).

Fig. 9

01_EN_3PN07521-1.fm Page 9 Monday, June 19, 2006 5:05 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Comments to this Manuals

No comments

Daikin FXAQ09MVJU Installation Manual Page 10

Comments to this Manuals

Related products and manuals for Split-system air conditioners Daikin FXAQ09MVJU