Daikin FTXN15KVJU Installation Manual

R410A Split SeriesINSTALLATION MANUALDAIKIN ROOM AIR CONDITIONEREnglishFrançaisEspañolInstallation manualManuel d’installationManual de instalaciónMOD

English 9English4.Laying piping, hoses, and wiring4-1. Right-side, right-back, or right-bottom piping 1) Attach the drain hose to the underside of th

10 EnglishIndoor Unit Installation4-3. Wall embedded piping• Insert the drain hose to this depth so it won’t be pulled out of the drain pipe.5.Wiring

English 11English6.Drain piping 1) Connect the drain hose, as described right.2) Remove the air filters and pour some water into the drain pan to che

12 EnglishTrial Operation and Testing1.Trial operation and testing1-1 Measure the supply voltage and make sure that it falls in the specified range.1

(1104) HT3P276866-2DM10B203ATwo-dimensional bar code is a code for manufacturing.00_CV_3P276866-2D.fm Page 2 Friday, February 18, 2011 4:21 PM

English 1EnglishSafety Precautions• Read these Safety Precautions carefully to ensure correct installation.• This manual classifies the precautions i

2 EnglishSafety PrecautionsAccessories – , Choosing an Installation Site• Before choosing the installation site, obtain user approval.1.Indoor un

English 3English2.Wireless remote controller1) Turn on all the fluorescent lamps in the room, if any, and find the site where remote control signals

4 EnglishIndoor Unit Installation DrawingsBefore screwing the remote controller holder to the wall, make sure that control signals are properly recei

English 5EnglishPreparation before Installation1.Removing and installing front panel•Removal methodHook fingers on the tabs on the left and right of

6 EnglishPreparation before Installation3.How to set the different addressesWhen two indoor units are installed in one room, the two wireless remote

English 7English2.Refrigerant pipingCAUTION• Use the flare nut fixed to the main unit. (To prevent cracking of the flare nut by aged deterioration.)•

8 EnglishIndoor Unit Installation1.Installing the mounting plate• The mounting plate should be installed on a wall which can support the weight of th