INSTALLATION MANUALR410A Split SeriesModels ATX20GV1B ATX20JV1BATX25GV1B ATX25JV1BATX35GV1B ATX35JV1BDeutschFrançaisNederlandsEspañolItalianoΕλληνικÜP
English 84.Wiring.1) Strip wire ends (15mm).2) Match wire colours with terminal numbers on indoor and outdoor unit’s terminal blocks and firmly screw
9 EnglishIndoor Unit Installation5-5. Prepare the accessory (separate product) [Figure 2].1) Remove the cover from the accessory (separate product).2
English 106.Drain piping.1) Connect the drain hose, as described right.2) Remove the air filters and pour some water into the drain pan to check the
11 EnglishRefrigerant Piping Work2.Refrigerant piping.CAUTION1) Use the flare nut fixed to the main unit. (To prevent cracking of the flare nut by ag
English 12Trial Operation and Testing1.Trial operation and testing.1-1 Measure the supply voltage and make sure that it falls in the specified range.
(0911) HT3P207973-2D M07B063CTwo-dimensional bar code is a code for manufacturing.00_CV_3P207973-2D.fm Page 2 Friday, September 4, 2009 11:19 AM
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,Kita-ku, Osaka, 530-8323 Japan 3SB64526-2DATX20GV1B, ATX25GV1B, ATX35GV1B, ATX20JV1B, ATX25JV1B, ATX35JV1B
1 EnglishSafety Precautions• Read these Safety Precautions carefully to ensure correct installation.• This manual classifies the precautions into WAR
English 2Accessories – , Choosing an Installation Site• Before choosing the installation site, obtain user approval.1.Indoor unit.• The indoor un
3 EnglishInstallation Tips1.Removing and installing front panel.• Removal method1) Place your fingers in the indentations on the main unit (one each
English 4Indoor Unit Installation DrawingsAM4 × 16L D Wireless remote controller E Remote controller holderBefore screwing the remote controller ho
5 EnglishIndoor Unit Installation1.Installing the mounting plate.• The mounting plate should be installed on a wall which can support the weight of t
English 62.Boring a wall hole and installing wall embedded pipe.• For walls containing metal frame or metal board, be sure to use a wall embedded pip
7 EnglishIndoor Unit Installation3-2. Left-side, left-back, or left-bottom piping. 1) Attach the drain hose to the underside of the refrigerant pipes
Comments to this Manuals